Chia sẻ:

Shafts - Both Ends Tapped Hollow Shafts - Not Applicable To Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow With Wrench Flats - MISUMI

Mã sản phẩm: wGoO7 Tình trạng: Còn hàng

Thương hiệu: MISUMI Loại sản phẩm: Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both E

Liên hệ

Số lượng:

Miễn phí vận chuyển

Đơn hàng từ 5000k

Mã:

HSD: 30/12/2023

Giảm tới 3%

Đơn hàng từ 3000k

Mã:

HSD: 30/12/2023

Giảm tới 4%

Đơn hàng từ 5000k

Mã:

HSD: 30/12/2023

Giảm tới 5%

Đơn hàng từ lớn hơn 10000k

Mã:

HSD: 30/12/2023

Cam Kết 100% Sản Phẩm Chính Hãng

Thời Gian Giao Hàng: Thông Thường 5-10 ngày; 1 Số SP Sẽ Cần Nhiều Thời Gian Hơn

Giá Trên Website Mang Tính Chất Tham Khảo - Vui Lòng Liên Hệ Hotline Để Cập Nhật Giá Chính Xác

Hỗ Trợ Kỹ Thuật 24/7

Mô tả sản phẩm

Hollow with Wrench Flats/Both Ends Tapped:Related Image

[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111

[ ! ]Features of Low Temp. Black Chrome Plating
>>P.128
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 15mm from wrench flats machined ends.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10mm) may lower hardness. >>P.112

Type		[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
Both Ends Tapped	Both Ends Tapped with Wrench Flats	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SPJW	SPWR	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardened >>P.112 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSPJW	SSPWR	SUS440C or 13Cr stainless		-
PSPJW	PSPWR	SUJ2 Equivalent		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
RSPJW	RSPWR	SUJ2 Equivalent		Low Temp. Black Chrome Plating

Specifications

• Both Ends Tapped Hollow Shafts

Part Number	-	L	-	M	-	N	-	SC
SPJW20 SPWR30	- -	500 680	- -	M16 M20	- -	N16 N20	-	SC10

■Both Ends Tapped Hollow Shafts

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Both Ends Tapped Hollow Shafts SPJW SSPJW (* marked sizes only) PSPJW	6	20~600	3				-0.004 -0.012	2	0.5 or Less
	*8	20~800 (300)	4	*5			-0.005 -0.014	3(3)	0.5 or Less
	*10	20~800 (400)	5	*6			-0.005 -0.014	4(4)	0.5 or Less
	*12	32~1000 (500)		*8	*T1 (RC1/8)		-0.006 -0.017	6(5)	0.5 or Less
	*13	40~1000 (500)		*10	*T1 (RC1/8)		-0.006 -0.017	7(5)	0.5 or Less
	*16	48~1200 (600)		*12	*T2 (RC1/4)		-0.006 -0.017	10(6)	0.5 or Less
	*20	64~1200 (800)		*16	*T3 (RC3/8)		-0.007 -0.020	14(8)	1.0 or Less
	*25	80~1200 (1000)		*20			-0.007 -0.020	16(10)	1.0 or Less
	*30	80~1500 (1000)		*20			-0.007 -0.020	17(12)	1.0 or Less
	35	96~1500			24		-0.009 -0.025	19	1.0 or Less
	40	96~1500			24	30	-0.009 -0.025	20	1.0 or Less
	50	120~1500				30	-0.009 -0.025	26	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Both Ends Tapped Hollow Shafts Low Temp. Black Chrome Plating RSPJW	6	20~500	3			-0.004 -0.012	2	0.5 or Less
	8	20~500	4	5		-0.005 -0.014	3	0.5 or Less
	10	20~500	5	6		-0.005 -0.014	4	0.5 or Less
	12	32~500		8	T1 (RC1/8)	-0.006 -0.017	6	0.5 or Less
	13	40~500		10	T1 (RC1/8)	-0.006 -0.017	7	0.5 or Less
	16	48~500		12	T2 (RC1/4)	-0.006 -0.017	10	0.5 or Less
	20	64~500		16	T3 (RC3/8)	-0.007 -0.020	14	1.0 or Less
	25	80~500		20		-0.007 -0.020	16	1.0 or Less
	30	80~500		20		-0.007 -0.020	17	1.0 or Less